Product Description

FRP water tank & GRP water tank & SMC water tank & WATER TANK PANEL

SMC combined-type water tank is currently used in new international water tank. By the overall quality of SMC water tank board joining together into. Its characteristic is USES the food grade resin, so good, clean water pollution; Have high strength, light weight. Corrosion resistance and beautiful outlook, long service life, maintenance management is convenient wait for a characteristic. SMC moulded veneer performance and specifications

SMC water tank is USES the food grade resin production of SMC sheet material, by high temperature, high pressure, mechanical suppression and into. In the manufacturing process, take machine pressure molding production methods. Increased the strength of the earthquake, impact resistance, overcome hand lay-up strength uneven defects, improve the stress strength and service life; In appearance design, plate into the central projection, improve the water tank in the radian bearingpressure ability, increased the water tank capacity, at the same time SiZhou *5 ° and plate with *0 ° of flange assembly, need not edge horn fittings, is more flexibility and flexibility, and water tank plate specification is: ***0 * ***0 mm; ***0 * **0 mm; **0 * **0 mm. 4 mm thickness, 6 mm, 7 mm and 7.5 mm, 9 mm, *0 mm, *2 mm, *4 mm. 4 mm thickness plate special do water tank cover plate. Thus the capacity of water tank for any assembly.

FRP WATER TANK 'S ADVATAGE:

*-Easy to assemble

*-Made of bottom, side and roof panels and panels with manhole

*-Tank of different height uses different bottom panels, side panels and top panels strictly according to the assembling principle

*-Assembling principle guarantees safety coefficient by reasonable saving of materials

*-Supports system (tie system) is designed and verified by precise mechanical calculations and tests

*-Stainless steel are used in tie system

*-Stainless steel or PVC supports are used

FRP WATER TANK SPECIFICATIONS:

• 	Physical properties		UNIT	SMC*1	SMC*2	SMC*3
  1	Specific gravity		g/cm3	1.*5—1.*5
  2	Water absorption		mg	≤*0	≤*0	*******-
  3	Shrink rate		%	≤0.*5	≤0.*5	≤0.*0
  4	Heat deflection temperature		°C	≥**0	≥**0	≥**0
  5	Izod impact strength unnotched		KJ /m2	≥*0	≥*0	≥*5
  6	Flexural strength		MPa	≥**0	≥**0	≥**5
  7	Insulation resistance	Normal	Ω	≥1.0×*0*3	≥1.0×*0*3	≥1.0×*0*2
  		*4hours after soaking		≥1.0×*0*2	≥1.0×*0*2	*******-
  8	Dielectric strength (at *0°C in oil)		MV/m	≥*2	≥*2	≥*0
  9	Dielectric loss factor (at 1 MHz )			≤0.**5	≤0.**5	********-
  *0	Dielectric constant ((at 1 MHz )			≤4.5	≤4.5	********-
  *1	Surface resistivity		S	≥**0